*guyverfan Posted December 23, 2014 Posted December 23, 2014 Well, the new figma is smaller than i thought. he's so fragile to pose, and that peg stand that presses into his back gave me the sh1t's so bad. i was just about to throw him into a bonfire, 'cause the hole in his back is so shallow that he comes loose and falls off when you try to adjust him. but after heating up my soldering iron and acouple of JD's, who cares? here's some pics. 3 Quote
lost unit Posted December 23, 2014 Posted December 23, 2014 mine came today also from a distance it looked smart but the shoulders seemed fragile and brittle, As i started to to rotate other parts was not impressed looks like this ones gonna stay in the box. Quote
Aether Posted December 23, 2014 Posted December 23, 2014 (edited) well you managed to get a WTF out of me Guyverfan! how are you making his megasmasher light up?? Lost Unit I hope that its not as crap as your initial thoughts... doesn't bode well for any future releases if the general consensus is that its a duff figure Edited December 23, 2014 by Aether Quote
*guyverfan Posted December 24, 2014 Posted December 24, 2014 well you managed to get a WTF out of me Guyverfan!how are you making his megasmasher light up?? acouple of led's hooked up to a battery and switch does the trick. be warned, after consuming some alcohol, do not stare at the photos for longer than 10mins. you may suffer from welders' flash for afew days, hehehehe. Quote
Kanji Posted December 30, 2014 Posted December 30, 2014 (edited) well you managed to get a WTF out of me Guyverfan! how are you making his megasmasher light up?? acouple of led's hooked up to a battery and switch does the trick.be warned, after consuming some alcohol, do not stare at the photos for longer than 10mins. you may suffer from welders' flash for afew days, hehehehe. Very nicely done!! I just got mine along with those energy blasts from tamashi. Will have to look for some LED's to replicate that!! Edit: And now I have mine!! I much prefer the scale of it alongside the other BFC/Ws: Edited January 2, 2015 by kanji_xiii 1 Quote
*guyverfan Posted January 5, 2015 Posted January 5, 2015 hay, yeah. i was thinking, is it just me or does the scale of the new figma better suit the bfw's compared to previous g1 in representing the size from the manga. Quote
Hayami Posted January 8, 2015 Posted January 8, 2015 Hello everyone. I'm hoping I could get some help. I recently got max factory's guyver I image head figure, but the ball joint to the head is ruined (the peg broke off from the neck slot and now the ball joint is stuck in the head. Are there any recommendations for replacement ball joints? Any help would be much appreciated! Quote
Hyper_Guyvantic Posted January 9, 2015 Posted January 9, 2015 Dont really know if this link will work here or not but this is a video of half of my collection https://www.facebook.com/video.php?v=884023944970606&set=vb.100000890257586&type=3 1 Quote
*guyversudo Posted January 10, 2015 Posted January 10, 2015 I finally received the other half of my figma order. I also got another model kit. On my way to getting the complete 1990's bfc kits. 1 Quote
*guyverfan Posted January 11, 2015 Posted January 11, 2015 Hello everyone. I'm hoping I could get some help. I recently got max factory's guyver I image head figure, but the ball joint to the head is ruined (the peg broke off from the neck slot and now the ball joint is stuck in the head. Are there any recommendations for replacement ball joints? Any help would be much appreciated! common problem, unfortunately, no spare parts that i know of and most have used an industrial grade superglue to stick the ball joint back on, thats if you're able to remove the ball end out from inside the head. if you manage to get this far, file one side of the ball joint slightly flat which will allow easier swapping of the heads. don't file too much off or the head becomes really loose and wont stay posed and continue to drop. Quote
Hayami Posted January 12, 2015 Posted January 12, 2015 Hello everyone. I'm hoping I could get some help. I recently got max factory's guyver I image head figure, but the ball joint to the head is ruined (the peg broke off from the neck slot and now the ball joint is stuck in the head. Are there any recommendations for replacement ball joints? Any help would be much appreciated! common problem, unfortunately, no spare parts that i know of and most have used an industrial grade superglue to stick the ball joint back on, thats if you're able to remove the ball end out from inside the head. if you manage to get this far, file one side of the ball joint slightly flat which will allow easier swapping of the heads. don't file too much off or the head becomes really loose and wont stay posed and continue to drop. Thank you for your response and tip about filing down the ball joint. That's unfortunate that this is a common problem. The ball joint is really stuck in there. I'm going to have to power drill a small screw and yank it out with nose pliers or something. Kind of odd that the opening for the full helmet head is a bit smaller than the image head. I'm using simple paper tape on the image head and shaped it to fit the neck slot. It's holding up for display purposes for now. Quote
Guyver1 Posted February 9, 2015 Posted February 9, 2015 Hello all, I just thought I would share a pic of a portion of my Guyver collection. Please enjoy! Thanks! -Guyver1 Quote
*guyversudo Posted February 10, 2015 Posted February 10, 2015 I really like how you have yours displayed. My wife will not let me display my Guyver collection in the living room. Good thing she's pretty... 2 Quote
Guyver1 Posted February 10, 2015 Posted February 10, 2015 LOL! Thanks!! My girlfriend was not too happy at first... but she digs Guyver so I was spared her wrath. ... for now. Quote
Kanji Posted February 13, 2015 Posted February 13, 2015 So my explosive effects finally shipped! Should arrive in 10 days: Looking forward to finally setting up a cool Guyver battle display......not sure which figures to use yet..........I want to use the new Figma, so for scale purposes my options are HZ Team 5, Gigantic Dark and Imakarum or maybe Evil Aptom........ Quote
madridiq8e Posted February 13, 2015 Posted February 13, 2015 ok I have to say that I'm literally drooling from all those beautiful collections. how and where did you guys get all these stuff ? I looked all over the internet and I can only find few of those thing and they are extra expensive ! I got the new Guyver 1 figma but I'd love to have the rest without paying $300+ for a single figure. is there like a website that sells all these stuff that I don't know about ? like the hyper zoanoid team 5 ! I didn't know they had figures for them :/ oh that's such a beauty I swear. Quote
Kanji Posted February 14, 2015 Posted February 14, 2015 ok I have to say that I'm literally drooling from all those beautiful collections. how and where did you guys get all these stuff ? I looked all over the internet and I can only find few of those thing and they are extra expensive ! I got the new Guyver 1 figma but I'd love to have the rest without paying $300+ for a single figure. is there like a website that sells all these stuff that I don't know about ? like the hyper zoanoid team 5 ! I didn't know they had figures for them :/ oh that's such a beauty I swear. ok I have to say that I'm literally drooling from all those beautiful collections. how and where did you guys get all these stuff ? I looked all over the internet and I can only find few of those thing and they are extra expensive ! I got the new Guyver 1 figma but I'd love to have the rest without paying $300+ for a single figure. is there like a website that sells all these stuff that I don't know about ? like the hyper zoanoid team 5 ! I didn't know they had figures for them :/ oh that's such a beauty I swear. Hey dude....thanks.... I think a lot of us started collecting these figure way back, when they were easier to find. I actually started collecting them 10 years ago now......so The Guyvers hadn't been out long.....unfortunately since not many were made, and it was so long ago, the prices have really skyrocketed. The prices on eBay are crazy, but you'll find most of them available there.... Your only cheaper option, other than finding a seller directly through the forum/etc. is YAJ with a proxy service or using Mandarake Japan's second hand store: http://ekizo.mandarake.co.jp/shop/en/search.do?action=keyword&doujin=all&keyword=ガイãƒãƒ¼&searchStrategy=keyword But you'll need a lot of patience and item often sell out within an hour of going up.....and the prices are still high, but probably the cheapest you'll find as thats Japanese market prices..... Quote
madridiq8e Posted February 14, 2015 Posted February 14, 2015 ok I have to say that I'm literally drooling from all those beautiful collections. how and where did you guys get all these stuff ? I looked all over the internet and I can only find few of those thing and they are extra expensive ! I got the new Guyver 1 figma but I'd love to have the rest without paying $300+ for a single figure. is there like a website that sells all these stuff that I don't know about ? like the hyper zoanoid team 5 ! I didn't know they had figures for them :/ oh that's such a beauty I swear. ok I have to say that I'm literally drooling from all those beautiful collections. how and where did you guys get all these stuff ? I looked all over the internet and I can only find few of those thing and they are extra expensive ! I got the new Guyver 1 figma but I'd love to have the rest without paying $300+ for a single figure. is there like a website that sells all these stuff that I don't know about ? like the hyper zoanoid team 5 ! I didn't know they had figures for them :/ oh that's such a beauty I swear. Hey dude....thanks.... I think a lot of us started collecting these figure way back, when they were easier to find. I actually started collecting them 10 years ago now......so The Guyvers hadn't been out long.....unfortunately since not many were made, and it was so long ago, the prices have really skyrocketed. The prices on eBay are crazy, but you'll find most of them available there.... Your only cheaper option, other than finding a seller directly through the forum/etc. is YAJ with a proxy service or using Mandarake Japan's second hand store: http://ekizo.mandarake.co.jp/shop/en/search.do?action=keyword&doujin=all&keyword=ガイãƒãƒ¼&searchStrategy=keyword But you'll need a lot of patience and item often sell out within an hour of going up.....and the prices are still high, but probably the cheapest you'll find as thats Japanese market prices..... man you have no idea how much I regret not buying those stuff when they came out. the website you provided has the cheapest gigantic guyver 1 I've seen online so far, how can I check if they can make international deliveries ? cause I couldn't find anything in the website. and one more question, do they sell English guyver manga ? like the actual book not online pictures, cause I couldn't find them anywhere Quote
Kanji Posted February 14, 2015 Posted February 14, 2015 Yeah, Manda ship internationally, I use them quite a lot and they offer different shipping methods as well. A couple publishers have released Guyver in English over the years, but only up until volume 10.....After that the license seems to have been dropped, and so far no one else has picked it up.....still hoping for someone to eventually!! good luck grabbing some Bio Fighters Quote
hjohjosan Posted February 16, 2015 Posted February 16, 2015 Hello guys and gals, I am new here, nice to meet you all Just got this huge haul in! BFC collection almost complete, only missing Guyver 3 black blades and ZX Tole. Quote
Kanji Posted February 17, 2015 Posted February 17, 2015 Hello guys and gals, I am new here, nice to meet you all Just got this huge haul in! BFC collection almost complete, only missing Guyver 3 black blades and ZX Tole. Wow nice haul!! That must have set you back a few $$$!! I passed on the GI w/image head and G3 w/black blades......didn't seem worth is to double up, but I have all the rest, as well as the 4 Team 5 Hyper Zonoids and Evil Aptom BFW's Quote
*guyversudo Posted February 19, 2015 Posted February 19, 2015 At long last I have all the 1:12 scale Guyver's. 2 Quote
Guyver1 Posted February 19, 2015 Posted February 19, 2015 What an amazing collection!! I am super jealous. ... but more happy to see such a great sight! LOL Quote
*guyverfan Posted February 19, 2015 Posted February 19, 2015 At long last I have all the 1:12 scale Guyver's. i likey alot. now all you have to do is build a huge family/rumpus room extension on the rear of the house to create a killer display of everything or pitch a tent in the backyard for the kids to live in so to use their bedrooms, LOL. Quote
hjohjosan Posted March 2, 2015 Posted March 2, 2015 Just got in these vinyl Zoanoids and the test tube!!! Still need Barcus!! 3 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.